PLANET WGSW-52040 - Manual (Page 62)

1-61
analyzed successfully, the level of them cannot be shown.
Example:
Show the level of privilege command.
Switch(config)#show privilege exec show ip route
The command : show ip route
Privilege is : 15
1.1.36 show tech-support
Command:
show tech-support [no-more]
Function:
Display the operational information and the task status of the switch. The technique specialist use this command to
diagnose whether the switch operate normally.
Parameter:
no-more: Display the operational information and the task status of the switch directly, do not connect the user by
“more”.
Command mode:
Admin and Configuration Mode.
Usage Guide:
This command is used to collect the relative information when the switch operation is malfunctioned.
Example:
Switch#show tech-support
1.1.37 show version
Command:
show version
Function: