PLANET WGSW-52040 - Manual (Page 787)

53-327
Example:
Show the information that the port receives flush packets.
Switch# show ulpp flush-receive-port
ULPP flush-receive portlist:
Portname Type Control Vlan
------------------------------------------------
Ethernet1/1 ARP 1
Ethernet1/3 MAC 1;3;5-10
53.19 show ulpp group
Command:
show ulpp group [group-id]
Function:
Show the configuration information of the ULPP groups which have been configured.
Parameter:
[group-id]: Show the information of the specific ULPP group.
Default:
By default, show the information of all ULPP groups which have been configured.
Command mode:
Admin mode.
Usage Guide:
Show the configuration information of ULPP groups which have been configured, such as: the state of the master
port and the slave port, the preemption mode, the preemption delay, etc.
Example:
Show the configuration information of ULPP group1.
Switch# show ulpp group 1
ULPP group 1 information:
Description: abc
Preemption mode: on
Preemption delay: 30s