PLANET WGSW-52040 - Manual (Page 422)

24-33
Parameters:
Automatic recovery time, in second ranging from 5 to 86400.
Default Settings:
300 seconds.
Command Mode:
Global configuration mode
User Guide:
Automatic recovery function should be enabled first.
Example:
Set the automatic recovery time as 3600 seconds.
Switch(config)#anti-arpscan recovery time 3600
24.8 anti-arpscan log enable
Command:
anti-arpscan log enable
no anti-arpscan log enable
Function:
Enable ARP scanning prevention log function; ”no anti-arpscan log enable” command will disable this function.
Parameters:
None.
Default Settings:
Enable ARP scanning prevention log function.
Command Mode:
Global configuration mode
User Guide:
After enabling ARP scanning prevention log function, users can check the detailed information of ports being closed
or automatically recovered by ARP scanning prevention or IP being disabled and recovered by ARP scanning