PLANET WGSW-52040 - Manual (Page 705)

47-245
None.
Usage Guide:
None.
Example:
Enable the debugging of the packet information for MAB authentication.
Switch#debug mac-authentication-bypass packet
47.4 mac-authentication-bypass binding-limit
Command:
mac-authentication-bypass binding-limit <1-100>
no mac-authentication-bypass binding-limit
Function:
Set the max binding number of MAB. The no command will restore the default binding number as 3.
Parameters:
<1-100> the max binding number of MAB, ranging from 1 to 100.
Command Mode:
Port Mode
Default:
The max binding number of MAB is 3.
Usage Guide:
Set the max binding number of MAB. When the binding number reaches to the max value, the port will stop binding,
if the max binding number is less than the current binding number of the port, the setting will be unsuccessful.
Example:
Configure the max binding number as 10.
Switch(Config)#interface ethernet 1/1
Switch(Config-If-Ethernet1/1)#mac-authentication-bypass binding-limit 10