PLANET WGSW-52040 - Manual (Page 829)

60-369
Usage guide:
None.
Example:
Enable the function for receiving IPv6 NTP multicast packets on vlan1 interface.
Switch(Config)# interface vlan 1
Switch(Config-if-Vlan1)#ntp ipv6 multicast client
60.14 ntp multicast client
Command:
ntp multicast client
no ntp multicast client
Function:
Configure the specified interface to receive NTP multicast packets, the no command will cancels the specified
interface to receive NTP multicast packets.
Parameter:
None.
Command mode:
vlan mode
Default:
Interface does not receive NTP multicast packets.
Usage guide:
None.
Example:
Enable the function for receiving NTP multicast packets on vlan1 interface.
Switch(Config)# interface vlan 1
Switch(Config-if-Vlan1)#ntp multicast client