PLANET WGSW-52040 - Manual (Page 522)

32-62
Command Mode:
Admin mode
Usage Guide:
Use this command to check relay agents’ configuration status for option 37 and option 38.
Example:
Switch#show ipv6 dhcp relay option
remote-id option enable
subscriber-id option enable
Interface Vlan 1: remote-id option configure “abc”
32.2.5 show ipv6 dhcp snooping option
Command:
show ipv6 dhcp snooping option
Function:
Display the configuration information of system snooping, including the enable switch for option 37 and option 38.
Parameters:
None.
Command Mode:
Admin mode
Usage Guide:
Use this command to check snooping configuration status for option 37 and option 38.
Example:
Switch#show ipv6 dhcp snooping option
remote-id option enable
subscriber-id option enable
The slot port vlan select option is : port and vlan
The delimiter is : #