PLANET WGSW-52040 - Manual (Page 847)

63-387
Chapter 63 Commands for Show
63.1 clear history all-users
Command:
clear history all-users
Function:
Clear the command history of all users saved by the switch.
Command Mode:
Admin mode
Usage Guide:
Using this command can clear the command history of all users.
Example:
Switch#clear history all-users
63.2 clear logging
Command:
clear logging sdram
Function:
This command is used to clear all the information in the log buffer zone.
Command Mode:
Admin Mode
Usage Guide:
When the old information in the log buffer zone is no longer concerned, we can use this command to clear all the
information.
Example:
Clear all information in the log buffer zone sdram.