PLANET WGSW-52040 - Manual (Page 313)

18-82
Total Addresses in System:2
Displayed information Explanation
Security Port Is port enabled as a secure port.
MaxSecurityAddr The maximum secure MAC address number set for the security port.
CurrentAddr The current secure MAC address number of the security port.
Security Action The violation mode of the port configuration.
Total Addresses in System The current secure MAC address number of the system.
Max Addresses limit in System The maximum secure MAC address number of the system.
18.2.3 show port-security address
Command:
show port-security address [interface <interface-id>]
Function:
Display the secure MAC addresses of the port.
Command mode:
Admin and Configuration Mode.
Parameter:
<interface-id> stands for the port to be displayed.
Usage Guide:
This command displays the secure port MAC address information, if no port is specified, secure MAC addresses of
all ports are displayed. The following is an example:
Switch#show port-security address interface ethernet 1/3
Security Mac Address Table
--------------------------------------------------------------------------------------------------
Vlan Mac Address Type Ports
1 0000.0000.1111 SecureConfigured Ethernet1/1
--------------------------------------------------------------------------------------------------
Total Addresses: 1
Displayed information Explanation