PLANET WGSW-52040 - Manual (Page 525)

33-65
33.5 debug ip dhcp snooping update
Command:
debug ip dhcp snooping update
no debug ip dhcp snooping update
Function:
This command is use to enable the DHCP snooping debug switch to debug the communication information between
DHCP snooping and helper server.
Command Mode:
Admin Mode.
Usage Guide:
Debug the information of communication messages received and sent by DHCP snooping and helper server.
33.6 enable trustview key
Command:
enable trustview key {0 | 7} <password>
no enable trustview key
Function:
To configure DES encrypted key for private packets, this command is also the switch for the private packets encrypt
and hash function enabled or not.
Parameter:
<password> is character string length less than 16, which use as encrypted key. 0 for un-encrypted text for the
password, while 7 for encrypted.
Command Mode:
Global Mode.
Default:
Disabled.
Usage Guide:
The switch communicates with the TrustView management system through private protocols. By default these