PLANET WGSW-52040 User Manual
Page 809
56-349
Function:
Display the sFlow configuration state.
Parameter:
None.
Command Mode:
All Modes.
Usage Guide:
This command is used to acknowledge the operation state of sFlow.
Switch#show sflow
Sflow version 1.2
Agent address is 172.16.1.100
Collector address have not configured
Collector port is 6343
Sampler priority is 2
Sflow DataSource: type 2, index 194(Ethernet1/2)
Collector address is 192.168.1.200
Collector port is 6343
Counter interval is 0
Sample rate is input 0, output 0
Sample packet max len is 1400
Sample header max len is 50
Sample version is 4
Displayed Information
Explanation
Sflow version 1.2
Indicates the sFlow version is 1.2
Agent address is 172.16.1.100
Address of the sFlow sample proxy is 172.16.1.100
Collector address have not
configured
the sFlow global analyzer address is not configured
Collector port is 6343
the sFlow global destination port is the defaulted 6343
Sampler priority is 2
The priority of sFlow when receiving packets from the hardware is
2.
Sflow DataSource: type 2, index
194(Ethernet1/1)
One sample proxy data source of the sFlow is the interface e1/1
and its type is 2 (Ethernet), the interface index is 194.
Collector address is 192.168.1.200
The analyzer address of the sampling address of the E1/1
interface is 192.168.1.200