PLANET WGSW-52040 - Manual (Page 482)

29-22
Rapid-Commit is disabled
29.28 show ipv6 dhcp pool
Command:
show ipv6 dhcp pool [<poolname>]
Function:
To show the DHCPv6 address pool information.
Parameter:
<poolname> is the DHCPv6 address pool name which configured already, and the length less than 32 characters. If
the <poolname> parameter is not provided, then all the DHCPv6 address pool information will be shown.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
To display the configuration and dynamic assignment information for DHCPv6 address pool, include the name of
DHCPv6 address pool, the prefix of DHCPv6 address pool, excluded address, DNS server configuration, relative
prefix information and so on. To display assigned address binding number of address pool that is used as address
assignment server. To display assigned prefix number of address pool that is used as prefix delegation server.
Example:
Switch#show ipv6 dhcp pool poolv6
29.29 show ipv6 dhcp statistics
Command:
show ipv6 dhcp statistics
Function:
To show the statistic of all kinds of DHCPv6 packets by DHCPv6 server.
Command Mode: