PLANET WGSW-52040 - Manual (Page 575)

35-115
Usage Guide:
It is recommended to use the default settings. Please keep this configure in accordance with IGMP configuration as
possible if layer 3 IGMP is running.
Example:
Switch(config)#ip igmp snooping vlan 2 query-mrsp 18
35.2.18 ip igmp snooping vlan query-robustness
Command:
ip igmp snooping vlan <vlan-id> query-robustness <value>
no ip igmp snooping vlan <vlan-id> query-robustness
Function:
Configure the query robustness. The “no ip igmp snooping vlan <vlan-id> query-robustness” command restores
to the default value.
Parameter:
vlan-id: VLAN ID, ranging between <1-4094>
value: ranging between <2-10>
Command Mode:
Global mode
Default:
2
Usage Guide:
It is recommended to use the default settings. Please keep this configure in accordance with IGMP configuration as
possible if layer 3 IGMP is running.
Example:
Switch(config)#ip igmp snooping vlan 2 query- robustness 3