PLANET WGSW-52040 - Manual (Page 611)

38-151
Create a name-based extended IPv6 access list; the no command delete the name-based extended IPv6 access list.
Parameter:
<name> is the name for access list, the character string length is from 1 to 32.
Command Mode:
Global Mode.
Default:
No IP address is configured by default.
Usage Guide:
When this command is run for the first time, only an empty access list with no entry will be created.
Example:
Create an extensive IPv6 access list named tcpFlow.
Switch (config)#ipv6 access-list extended tcpFlow
38.15 {ip|ipv6|mac|mac-ip} access-group
Command:
{ip|ipv6|mac|mac-ip} access-group <name> {in} [traffic-statistic]
no {ip|ipv6|mac|mac-ip} access-group <name> {in}
Function:
Apply an access-list on some direction of port, and determine if ACL rule is added statistic counter or not by options;
the no command deletes access-list binding on the port.
Parameter:
<name> is the name for access list, the character string length is from 1 to 32.
Command Mode:
Port Mode
Default:
The entry of port is not bound ACL.