Chapter 53 commands for ulpp, 1 clear ulpp flush counter interface, 2 control vlan – PLANET WGSW-52040 User Manual
Page 774: Chapter 53 commands for ulpp -314, Clear ulpp flush counter interface, Control vlan
Advertising
53-314
Chapter 53 Commands for ULPP
53.1 clear ulpp flush counter interface
Command:
clear ulpp flush counter interface <name>
Function:
Clear the statistic information of the flush packets.
Parameter:
<name> is the name of the port.
Default:
None.
Command mode:
Admin mode.
Usage Guide:
None.
Example:
Clear the statistic information of the flush packets for the port1/1.
Switch#clear ulpp flush counter interface e1/1
ULPP flush counter has been reset.
53.2 control vlan
Command:
control vlan <integer>
no control vlan
Function:
Configure the control VLAN of ULPP group; the no command restores the default value.
Advertising