PLANET WGSW-52040 - Manual (Page 797)

54-337
Parameter:
[group-id]: the ID of ULSM group.
Default:
By default, show the information of all ULSM groups which have been configured.
Command mode:
Admin Mode.
Usage Guide:
None.
Example:
Show the configuration information of ULSM group1.
Switch# show ulsm group 1
ULSM group 1 information:
ULSM group state: Down
Member Role State Down by ULSM
---------------------------------------------------------------------------------------------
ethernet1/1 UpLINK Down
ethernet1/2 DownLINK Down Yes
54.3 ulsm group
Command:
ulsm group <group-id>
no ulsm group <group-id>
Function:
Create a ULSM group. The no command deletes the ULSM group.
Parameter:
<group-id> is the ID of ULSM group, range from 1 to 32.
Default:
There is no ULSM group configured by default.