PLANET WGSW-52040 - Manual (Page 302)

17-71
function on the port.
Parameter:
None.
Command Mode:
Port Mode.
Default:
The IP-subnet-based VLAN is enabled on the port by default.
Usage Guide:
After adding the IP subnet to specified VLAN, the IP-subnet-based VLAN function will be globally enabled. This
command can disable the IP-subnet-based VLAN function on specified port to meet special user applications.
Example:
Disable the IP-subnet-based VLAN function on port1.
Switch#config
Switch(config)#interface ethernet 1/1
Switch(Config-If-Ethernet1/1)#no switchport subnet-vlan enable
17.4 Commands for Voice VLAN Configuration
17.4.1 show voice-vlan
Command:
show voice-vlan
Function:
Display the configuration status of the Voice VLAN on the switch.
Parameter:
None.
Command Mode:
Admin Mode and other Configuration Mode.
Usage Guide:
Display Voice VLAN Configuration.