PLANET WGSW-52040 - Manual (Page 479)

29-19
no service dhcpv6
Function:
To enable DHCPv6 server function; the no form of this command disables the configuration.
Parameter:
None.
Default:
Disabled.
Command Mode:
Global Mode.
Usage Guide:
The DHCPv6 services include DHCPv6 server function, DHCPv6 relay function, DHCPv6 prefix delegation function.
All of the above services are configured on ports. Only when DHCPv6 server function is enabled, the IP address
assignment of DHCPv6 client, DHCPv6 relay and DHCPv6 prefix delegation functions enabled can be configured on
ports.
Example:
To enable DHCPv6 server.
Switch(config)#service dhcpv6
29.24 show ipv6 dhcp
Command:
show ipv6 dhcp
Function:
To show the enable switch and DUID of DHCPv6 service.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
To show the enable switch and DUID of DHCPv6 service, server identifier options only use DUID of DUID-LLT type.