PLANET WGSW-52040 - Manual (Page 509)

32-49
Parameters:
(sp | sv | pv | spv): a selection in combinations of slot, port and vlan, among which sp represents slot and port, sv
represents slot and vlan, pv represents port and vlan, and spv represents slot, port and vlan.
WORD: the delimiter between slot, port and vlan which ranges among (#|.|,|;|:|/|space). Note that there're two
delimiter WORDs here, of which the former is the delimiter between slot and port and the latter is the one between
port and vlan.
Default:
Null.
Command Mode:
Global configuration mode
Usage Guide:
The command has no effect on ports with self-defined subscriber-id. If user redefines the subscriber-id of the port
after using the command, the user-defined one prevails. This configuration is null by default.
Example:
Switch(config)# ipv6 dhcp relay subscriber-id select sp delimiter #
32.1.9 ipv6 dhcp server remote-id option
Command:
ipv6 dhcp server remote-id option
no ipv6 dhcp server remote-id option
Function:
This command enables DHCPv6 server to support the identification of option 37, the no form of this command
disables it.
Parameters:
None.
Default:
Do not support option 37.
Command Mode: