PLANET WGSW-52040 - Manual (Page 232)

13-1
Chapter 13 Commands for DDM
13.1 clear transceiver threshold-violation
Command:
clear transceiver threshold-violation [interface ethernet <interface-list>]
Function:
Clear the threshold violation of the transceiver monitoring.
Parameter:
interface ethernet <interface-list>: The interface list that the threshold violation of the transceiver monitoring needs to
be cleared.
Command Mode:
Admin mode
Default:
None.
Usage Guide:
None.
Example:
Clear he threshold violation of the transceiver monitoring on port 21, 25, 26, 28.
Switch#clear transceiver threshold-violation interface ethernet 1/21;25-26;28
13.2 debug transceiver
Command:
debug transceiver {on | off}
Function:
Enable/disable DDM debugging.