PLANET WGSW-52040 - Manual (Page 354)

19-123
Instance Information
Self Bridge Id The priority and the MAC address of the current bridge for the current
instance
Root Id The priority and the MAC address of the root bridge for the current
instance
Ext.RootPathCost Total cost from the current bridge to the root of the entire network
Int.RootPathCost Cost from the current bridge to the region root of the current instance
Root Port ID Root port of the current instance on the current bridge
MSTP Port List Of The
Current Instance
PortName Port name
ID Port priority and port index
ExtRPC Port cost to the root of the entire network
IntRPC Cost from the current port to the region root of the current instance
State Port status of the current instance
Role Port role of the current instance
DsgBridge Upward designated bridge of the current port in the current instance
DsgPort Upward designated port of the current port in the current instance
19.2.4 show spanning-tree mst config
Command:
show spanning-tree mst config
Function:
Display the configuration of the MSTP in the Admin mode.
Command mode:
Admin Mode
Usage Guide:
In the Admin mode, this command can show the parameters of the MSTP configuration such as MSTP name,
revision, VLAN and instance mapping.
Example:
Display the configuration of the MSTP on the switch.