PLANET WGSW-52040 - Manual (Page 725)

48-265
Parameter:
ehernet: physical port
interface-name: port name
Command Mode:
Admin mode
Default:
The configuration information is null.
Usage Guide:
Check the configuration information of the corresponding port, show whether the port is trust port, strip function is
enabled, rate limit is enabled, show the configured circuit ID and remote ID.
Example:
Show pppoe intermediate-agent configuration information of port ethernet1/2.
Switch# show pppoe intermediate-agent info interface ethernet 1/2
Interface IA Trusted vendor Strip Rate limit circuit id remote id
---------- ------ ------ ----------- ------- --------- ----------
Ethernet1/2 yes no no no test1/port1 host1