PLANET WGSW-52040 - Manual (Page 311)

18-80
Function:
Show the current MAC table.
Parameter:
static static entries; blackhole filter entries; aging-time <aging-time> address aging time; count entry’s number,
multicast multicast entries; <mac-addr> entry’s MAC address; <vlan-id> entry’s VLAN number; <interface-name>
entry’s interface name.
Command mode:
Admin and Configuration Mode.
Default:
MAC address table is not displayed by default.
Usage guide:
This command can display various classes of MAC address entries. Users can also use show mac-address-table
to display all the MAC address entries.
Example:
Display all the filter MAC address entries.
Switch#show mac-address-table blackhole
18.2 Commands for Mac Address Binding configuration
18.2.1 clear port-security dynamic
Command:
clear port-security dynamic [address <mac-addr> | interface <interface-id>]
Function:
Clear the Dynamic MAC addresses of the specified port.
Command mode:
Admin Mode.
Parameter:
<mac-addr> stands MAC address; <interface-id> for specified port number.