PLANET WGSW-52040 - Manual (Page 43)

1-42
Usage guide:
The switch cannot continue timing with power off, hence the current date and time must be first set at environments
where exact time is required.
Example:
To set the switch current date and time to 2002.8.1 23: 0: 0:
Switch#clock set 23:0:0 2002.8.1
Relative
Command: show clock
1.1.6 config
Command:
config [terminal]
Function:
Enter Global Mode from Admin Mode.
Parameter:
[terminal] indicates terminal configuration.
Command mode:
Admin Mode
Example:
Switch#config
1.1.7 debug ssh-server
Command:
debug ssh-server
no debug ssh-server
Function:
Display SSH server debugging information; the “no debug ssh-server” command stops displaying SSH server