1 clear cpu-rx-stat protocol, 2 cpu-rx-ratelimit protocol, Received and sent by cpu -413 – PLANET WGSW-52040 User Manual
Page 873: Clear cpu, Stat protocol, Ratelimit protocol
65-413
Chapter 65 Commands for
Debugging and Diagnosis for
Packets Received and Sent by
CPU
65.1 clear cpu-rx-stat protocol
Command:
clear cpu-rx-stat protocol[ <protocol-type> ]
Function:
Clear the statistics of the CPU received packets of the protocol type.
Parameter:
<protocol-type> is the type of the protocol of the packet, including dot1x, stp, snmp, arp, telnet, http, dhcp, igmp,
ssh
Command Mode:
Global Mode
Usage Guide:
This command clear the statistics of the CPU received packets of the protocol type, it is supposed to be used with
the help of the technical support.
Example:
Clear the statistics of the CPU receives ARP packets.
Switch(config)#clear cpu-rx-stat protocol arp
65.2 cpu-rx-ratelimit protocol
Command:
cpu-rx-ratelimit protocol <protocol-type> <packets>
no cpu-rx-ratelimit protocol <protocol-type>