Chapter 41 commands for am configuration, 1 am enable, 2 am port – PLANET WGSW-52040 User Manual
Page 663: Chapter 41 commands for am configuration -203, Am enable, Am port
Advertising
41-203
Chapter 41 Commands for AM
Configuration
41.1 am enable
Command:
am enable
no am enable
Function:
Globally enable/disable AM function.
Parameters:
None.
Default:
AM function is disabled by default.
Command Mode:
Global Mode.
Usage Guide:
None.
Example:
Enable AM function on the switch.
Switch(config)#am enable
Disable AM function on the switch.
Switch(config)#no am enable
41.2 am port
Command:
am iport
no am port
Function:
Advertising