PLANET WGSW-52040 - Manual (Page 791)

53-331
53.24 ulpp flush enable arp
Command:
ulpp flush enable arp
Function:
Enable receiving the flush packets of deleting ARP.
Parameter:
None.
Default:
By default, disable receiving the flush packets of deleting ARP.
Command mode:
Port mode.
Usage Guide:
Enable this function to receive the flush packets which delete ARP.
Example:
Enable receiving of the flush packets of deleting ARP.
Switch(config)# interface ethernet 1/1
Switch(config-If-Ethernet1/1)# ulpp flush enable arp
53.25 ulpp flush enable mac
Command:
ulpp flush enable mac
Function:
Enable receiving the flush packets of updating MAC address.
Parameter:
None.
Default: