PLANET WGSW-52040 - Manual (Page 768)

52-308
Function:
Enable the compatible mode for ERRP, the no command disables the compatible mode.
Parameter:
None.
Command Mode:
Global mode
Default:
Disable the compatible function of ERRP.
Usage Guide:
If the compatible function of ERRP needs to be configured, MRPP protocol should be enabled firstly. Furthermore,
the port with ERRP compatible mode should be configured as hybrid or trunk mode and allow the packets with
Control Vlan information.
Example:
Enable the compatible function of ERRP globally.
Switch(Config)#mrpp enable
Switch(Config)#mrpp errp compatible
Switch(Config)#mrpp ring 2
Switch(mrpp-ring-2)#control-vlan 4000
Switch(config-if-ethernet1/51)#switchport mode hybrid
Switch(config-if-ethernet1/51)#switchport hybrid allowed vlan 4000 tag
Switch(config-if-ethernet1/52)#switchport mode hybrid
Switch(config-if-ethernet1/52)#switchport hybrid allowed vlan 4000 tag
52.11 mrpp poll-time
Command:
mrpp poll-time <20-2000>
Function:
Configure the query interval of MRPP.