PLANET WGSW-52040 - Manual (Page 817)

59-357
Function:
Displays or disables SNTP debug information.
Parameters:
adjust stands for SNTP clock adjustment information; packet for SNTP packets, select for SNTP clock selection.
Command mode:
Admin Mode
Example:
Displaying debugging information for SNTP packet.
Switch#debug sntp packet
59.3 sntp polltime
Command:
sntp polltime <interval>
no sntp polltime
Function:
Sets the interval for SNTP clients to send requests to NTP/SNTP; the “no sntp polltime” command cancels the
polltime sets and restores the default setting.
Parameters:
<interval> is the interval value from 16 to 16284.
Default:
The default polltime is 64 seconds.
Command Mode:
Global Mode
Example:
Setting the client to send request to the server every 128 seconds.
Switch#config
Switch(config)#sntp polltime128