Chapter 33 commands for dhcp snooping, 1 debug ip dhcp snooping binding, 2 debug ip dhcp snooping event – PLANET WGSW-52040 User Manual
Page 523: Chapter 33 commands for dhcp snooping -63, Debug ip dhcp snooping binding, Debug ip dhcp snooping event
33-63
Chapter 33 Commands for DHCP
Snooping
33.1 debug ip dhcp snooping binding
Command:
debug ip dhcp snooping binding
no debug ip dhcp snooping binding
Function:
This command is use to enable the DHCP SNOOPING debug switch to debug the state of binding data of DHCP
SNOOPING.
Command Mode:
Admin mode
Usage Guide:
This command is mainly used to debug the state of DHCP SNOOPING task when it adds ARP list entries, dot1x
users and trusted user list entries according to binding data.
33.2 debug ip dhcp snooping event
Command:
debug ip dhcp snooping event
no debug ip dhcp snooping event
Function:
This command is use to enable the DHCP SNOOPING debug switch to debug the state of DHCP SNOOPING task.
Command Mode:
Admin mode.
Usage Guide:
This command is mainly used to debug the state of DHCP SNOOPING task and available of outputting the state of