PLANET WGSW-52040 - Manual (Page 66)

1-65
Usage Guide:
Config file saved by Flash Memory can be used for startup file.
Example:
Save the current running config as .cfg file with name of 123.
Switch#write running-config 123.cfg
1.2 Commands for Telnet
1.2.1 aaa authorization config-commands
Command:
aaa authorization config-commands
no aaa authorization config-commands
Function:
Enable command authorization function for the login user with VTY (login with Telnet and SSH). The no command
disables this function. Only enabling this command and configuring command authorization manner, it will request to
authorize when executing some command.
Default:
Disable.
Command Mode:
Global Mode.
Usage Guide:
Only after configuring this command and configuring command authorization manner and authorization selection
priority of login user with VTY, it can be authorized when configuring command with corresponding command level
for login user with VTY.
Example:
Enable VTY command authorization function.
Switch(config)# aaa authorization config-commands
1.2.2 accounting exec