PLANET WGSW-52040 - Manual (Page 438)

28-49
Command mode:
Admin Mode
Default:
Disable the debugging.
28.1.7 debug ip dhcp relay
Command:
debug ip dhcp server packet
no debug ip dhcp server packet
Function:
Enable the debugging of DHCP relay, no command disables the debugging of DHCP relay.
Command mode:
Admin Mode
Default:
Disable the debugging.
28.1.8 debug ip dhcp server
Command:
debug ip dhcp server { events | linkage | packets }
no debug ip dhcp server { events | linkage | packets }
Function:
Enables DHCP server debug information: the “no debug ip dhcp server {events | linkage | packets}” command
disables the debug information for DHCP server.
Default:
Debug information is disabled by default.
Command mode: