8 ntp authenticate, 9 ntp authentication-key, Ntp authenticate – PLANET WGSW-52040 User Manual
Page 825: Ntp authentication
Advertising
60-365
To configure access control list 2 on the switch.
Switch(config)#ntp access-group server 2
60.8 ntp authenticate
Command:
ntp authenticate
no ntp authenticate
Function:
To enable/cancel NTP authentication function.
Parameter:
None.
Default:
Disabled.
Command Mode:
Global Mode.
Usage Guide:
None.
Example:
To enable NTP authentication function.
Switch(config)#ntp authenticate
60.9 ntp authentication-key
Command:
ntp authentication-key <key-id> md5 <value>
no ntp authentication-key <key-id>
Function:
Advertising