PLANET WGSW-52040 - Manual (Page 269)

17-38
ports in the Private VLANs whose association is deleted are removed from the Private VLANs.
Example:
Associate Isolated VLAN200 and Community VLAN300 to Primary VLAN100.
Switch(Config-Vlan100)#private-vlan association 200;300
17.1.16 show dot1q-tunnel
Command:
show dot1q-tunnel
Function:
Display the information of all the ports at dot1q-tunnel state.
Parameter:
None.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
This command is used for displaying the information of the ports at dot1q-tunnel state.
Example:
Display current dot1q-tunnel state.
Switch#show dot1q-tunnel
Interface Ethernet1/1:
dot1q-tunnel is enable
Interface Ethernet1/3:
dot1q-tunnel is enable
17.1.17 show garp timer
Command:
show garp timer (join | leave | leaveall |)