PLANET WGSW-52040 - Manual (Page 213)

11-212
Switch(Config-If-Ethernet1/4)#ethernet-oam errored-symbol-period window 10
11.19 ethernet-oam link-monitor
Command:
ethernet-oam link-monitor
no ethernet-oam link-monitor
Function:
Enable link monitor, no command disables the function.
Parameters:
None.
Command Mode:
Port mode
Default:
Enable.
Usage Guide:
Enable OAM to monitor local link errors. Generally link monitor is enabled when enabling OAM function of the port.
When OAM link monitor is disabled, although local link error is not monitored, Event information OAMPDU from the
peer is still normally received and processed.
Example:
Enable the link monitor of port 1/4.
Switch(Config-If-Ethernet1/4)#ethernet-oam link-monitor
11.20 ethernet-oam mode
Command:
ethernet-oam mode {active | passive}
no ethernet-oam mode
Function:
Configure the mode of OAM function, no command restores the default value.