PLANET WGSW-52040 - Manual (Page 40)

1-39
Configure the Telnet and ssh login method to Local and RADIUS authentication method.
Switch(config)# authentication line vty login local radius
Relative Command:
aaa enable, radius-server authentication host, tacacs-server authentication host, tacacs-server key
1.1.2 banner
Command:
banner motd <LINE>
no banner motd
Function:
This command is used to configure the information displayed when the login authentication of a telnet or console
user is successful, the no command configures that the information is not displayed when the authentication is
successful.
Parameters:
<LINE>: The information displayed when the authentication is successful, length limit from 1 to 100 characters.
Default:
Do not show the information when the authentication is successful.
Command mode:
Global mode.
Example:
Switch(config)#banner motd Welcome
1.1.3 boot img
Command:
boot img <img-file-url> {primary | backup}
Function:
Configure the first and second img files used in the next boot of the switch.