PLANET WGSW-52040 - Manual (Page 748)

51-288
51.1.7 savi ipv6 binding num
Command:
savi ipv6 binding num <limit-num>
no savi ipv6 binding num
Function:
Configure the number of the corresponding binding with the port, no command restores the default value.
Parameter:
limit-num: set the range from 0 to 65535, the default value of the port binding number is 65535.
Command Mode:
Port Mode.
Default:
65535.
Usage Guide:
The configured binding number only include the dynamic binding type of slaac, dhcp. If the binding sum exceeds the
configured number, this port does not create new dynamic binding any more, if the configured number is 0, this port
does not create any dynamic binding.
Example:
Configure the binding number to be 100 for port ethernet1/1.
Switch(config)#interface ethernet1/1
Switch(config-if-ethernet1/1)# savi ipv6 binding num 100
51.1.8 savi ipv6 check source binding
Command:
savi ipv6 check source binding ip <ip-address> mac <mac-address> interface <if-name> {type [slaac | dhcp]
lifetime <lifetime> | type static}
no savi ipv6 check source binding ip <ip-address> interface <if-name>