PLANET WGSW-52040 - Manual (Page 219)

11-218
local_par_action
Working mode of the local receiver in the following:
FWD, receiving any packets is allowed;
DISCARD, only OAMPDU packets is received while others are
discarded;
LB, OAM remote loopback is enabled on the port. In this case, all the
packets except OAMPDU packets received are returned to their
sources along the ways they come.
Loopback Supported Whether support remote loopback: YES for support and NO for not.
Unidirectional Support
Whether support unidirectional transmission: YES for support and NO
for not.
Link Events Whether support general link events: YES for support and NO for not.
Remote Failure
Whether support severe link events (remote failure indication): YES for
support and NO for not.
Link Fault Whether occur a Link Fault event: 0 for no and 1 for yes.
Dying Gasp Whether occur a Dying Gasp event: 0 for no and 1 for yes.
Critical Event Whether occur a Critical Event: 0 for no and 1 for yes.
Max_OAMPDU_Size The maximum length of OAMPDU is supported.
OAMPDU
Show the number of the OAMPDU packets sent and received which is
the sum of three kinds of packets.
Information
Show the number of the Information OAMPDU packets sent and
received
Event Notification
Show the number of the Event Notification OAMPDU packets sent and
received
Loopback Control
Show the number of the Loopback Control OAMPDU packets sent and
received
Display detailed information of remote OAM entity for Ethernet 1/2
Switch#show ethernet-oam remote interface ethernet1/2
Ethernet1/2 oam remote Information：
Remote_Mac_Address=0030.4f19.3a3e
local _mode=active
--------------------------------------------------------------------------
local_pdu=INFO
local_mux_action=FWD
local_par_action=DISCARD
Loopback Supported=YES
Unidirectional Support=NO
Link Events=YES
Remote Failure=YES