PLANET WGSW-52040 - Manual (Page 236)

13-5
Switch(config-if-ethernet1/1)#transceiver-monitoring enable
13.6 transceiver-monitoring interval
Command:
transceiver-monitoring interval <minutes>
no transceiver-monitoring interval
Function:
Set the interval of the transceiver monitoring. The no command sets the interval to be the default interval of 15
minutes.
Parameter:
<minutes>: The interval of the transceiver monitoring needs to be set.
Command Mode:
Global mode
Default:
15 minutes.
Usage Guide:
None.
Example:
Set the interval of the transceiver monitoring as 1 minute.
Switch(config)#transceiver-monitoring interval 1
13.7 transceiver threshold
Command:
transceiver threshold {default | {temperature | voltage | bias | rx-power | tx-power} {high-alarm | low-alarm |
high-warn | low-warn} {<value> | default}}
Function: