PLANET WGSW-52040 - Manual (Page 606)

38-146
<num> is the access-list No. which is a decimal’s No. from 700-799; deny if rules are matching, deny access;
permit if rules are matching, permit access; <host_smac>, <sumac> source MAC address; <sumac-mask> mask
(reverse mask) of source MAC address.
Command Mode:
Global mode
Default Configuration:
No access-list configured.
Usage Guide:
When the user assign specific <num> for the first time, ACL of the serial number is created, then the lists are added
into this ACL.
Examples:
Permit the passage of packets with source MAC address 00-00-XX-XX-00-01, and deny passage of packets with
source MAC address 00-00-00-XX-00-ab.
Switch(config)# access-list 700 permit 00-00-00-00-00-01 00-00-FF-FF-00-00
Switch(config)# access-list 700 deny 00-00-00-00-00-ab 00-00-00-FF-00-00
38.8 clear access-group statistic
Command:
clear access-group statistic [ethernet <interface-name> ]
Functions:
Empty packet statistics information of the specified interface.
Parameters:
<interface-name>: Interface name.
Command Mode:
Admin mode
Default:
None