PLANET WGSW-52040 - Manual (Page 397)

23-8
no operation of this command will disable debug of receiving and sending operations for specified types of IPv6 ND
messages, while no specification means to disable that for all five types of ND message.
Parameter:
None.
Default:
The debug of receiving and sending operations for all five types of IPv6 ND messages is disabled by default.
Command Mode:
Admin Mode
Usage Guide:
The ND protocol is an essential part of IPv6. This command can display the ND message of a specified type for
troubleshooting.
Example:
Switch#debug ipv6 nd
IPv6 ND: rcvd, type <136>, src <fe80::203:fff:fe01:2786>, dst <fe80::203:fff:fe01:59ba>
Displayed information Explanation
IPv6 ND: rcvd Receive ND data report
type <136> ND Type
src <fe80::203:fff:fe01:2786> Source IPv6 address
dst <fe80::203:fff:fe01:59ba> Destination IPv6 address
23.2.8 ip address
Command:
ip address <ip-address> <mask> [secondary]
no ip address [<ip-address> <mask>] [secondary]
Function:
Set IP address and net mask of switch; the “no ip address [<ip-address> <mask>] [secondary]” command
deletes the IP address configuration.
Parameter: