Chapter 54 ipv4 multicast protocol, 1 debug ulsm event, 2 show ulsm group – PLANET WGSW-52040 User Manual
Page 796: Chapter 54 ipv4 multicast protocol -336, Debug ulsm event, Show ulsm group
Advertising
54-336
Chapter 54 IPv4 Multicast Protocol
54.1 debug ulsm event
Command:
debug ulsm event
no debug ulsm event
Function:
Show the event information of ULSM. The no operation disables showing ULSM events.
Parameter:
None.
Default:
None.
Command mode:
Admin Mode.
Usage Guide:
None.
Example:
Show the event information of ULSM.
Switch# debug ulsm event
Downlink synchoronized with ULSM group, change state to Down.
54.2 show ulsm group
Command:
show ulsm group [group-id]
Function:
Show the configuration information of ULSM group.
Advertising