PLANET WGSW-52040 - Manual (Page 544)

33-84
The switch choose private packet version one to communicate with DCBI.
Usage Guide:
If the DCBI access control system is applied, the switch should be configured to use private protocol of version one
to communicate with the DCBI server. However, if TrustView is applied, version two should be applied.
Example:
To configure the switch choose private packet version two to communicate with inter security management
background system.
switch(config)#ip user private packet version two
33.29 show ip dhcp snooping
Command:
show ip dhcp snooping [interface [ethernet] <interfaceName>]
Function:
Display the current cofiguration information of dhcp snooping or display the records of defense actions of a specific
port.
Parameters:
<interfaceName>: The name of the specific port.
Command Mode:
Admin and Global Configuration Mode.
Default Settings:
None.
Usage Guide:
If there is no specific port, then display the current cofiguration information of dhcp snooping, otherwise, display the
records of defense actions of the specific port.
Example:
switch#show ip dhcp snooping
DHCP Snooping is enabled