PLANET WGSW-52040 - Manual (Page 251)

15-20
Chapter 15 Commands for
bpdu-tunnel
15.1 bpdu-tunnel dmac
Command:
bpdu-tunnel dmac <mac>
no bpdu-tunnel dmac
Function:
Configure the tunnel MAC address globally, the no command restores the default tunnel MAC address.
Parameter:
<mac>: MAC address
Command Mode:
Global mode
Default:
Default MAC address.
Usage Guide:
Configure the tunnel MAC address globally, use the configured MAC (it must be multicast MAC address) to forward
the specified protocol across the tunnel.
Example:
Configure the tunnel MAC address.
Switch(Config)# bpdu-tunnel dmac 01-02-03-04-05-06
15.2 bpdu-tunnel stp
Command:
bpdu-tunnel stp
no bpdu-tunnel stp