PLANET WGSW-52040 - Manual (Page 351)

19-120
Example:
Enable to receive the debugging information of BPDU messages on the port1/1.
Switch#debug spanning-tree
Switch#debug spanning-tree bpdu rx interface e1/1
19.2.2 show mst-pending
Command:
show mst-pending
Function:
In the MSTP region mode, display the configuration of the current MSTP region.
Command mode:
Admin Mode
Usage Guide:
In the MSTP region mode, display the configuration of the current MSTP region such as MSTP name, revision, VLAN
and instance mapping.
Note: Before quitting the MSTP region mode, the displayed parameters may not be effective.
Example:
Display the configuration of the current MSTP region.
Switch(config)#spanning-tree mst configuration
Switch(Config-Mstp-Region)#show mst-pending
Name switch
Revision 0
Instance Vlans Mapped
----------------------------------
00 1-29, 31-39, 41-4093
03 30
04 40
05 4094
----------------------------------
Switch(Config-Mstp-Region)#