PLANET WGSW-52040 - Manual (Page 489)

30-29
30.5 ip dhcp relay information option remote-id format
Command:
ip dhcp relay information option remote-id format {default | vs-hp}
Function:
Set remote-id format of Relay Agent option82.
Parameters:
default means that remote-id is the VLAN MAC address with hexadecimal format, vs-hp means that remote-id is
compatible with the remote-id format of HP manufacturer.
Default:
default.
Command Mode:
Global mode
Usage Guide:
The default remote-id format defined as below:
Remote option
2 6 MAC
1 byte 1 byte
6 byte
type
Length
MAC means VLAN MAC address.
The compatible remote-id format with HP manufacturer defined as below:
Remote option
2 4 IP
1 byte 1 byte 4 byte
type
Length
IP means the primary IP address of layer 3 interface where DHCP packets from.
Example:
Set remote-id of Relay Agent option82 as the compatible format with HP manufacturer.