PLANET WGSW-52040 - Manual (Page 624)

38-164
show ipv6 access-lists [<num>|<acl-name>]
Function:
Show the configured IPv6 access control list.
Parameter:
<num> is the number of specific access control list, the valid range is 500～699, amongst 500～599 is digit standard
IPv6 ACL number, 600～699 is the digit extended IPv6 ACL number; <acl-name> is the nomenclature character
string of a specific access control list, lengthening within 1～32.
Default:
None.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
When no access control list is specified, all the access control lists will be displayed; in used x time（s）is shown the
times the ACL had been quoted.
Example:
Switch #show ipv6 access-lists
ipv6 access-list 500(used 1 time(s))
ipv6 access-list 500 deny any-source
ipv6 access-list 510(used 1 time(s))
ipv6 access-list 510 deny ip any-source any-destination
ipv6 access-list 510 deny tcp any-source any-destination
ipv6 access-list 520(used 1 time(s))
ipv6 access-list 520 permit ip any-source any-destination
38.28 show time-range
Command:
show time-range <word>
Functions: