PLANET WGSW-52040 - Manual (Page 240)

14-9
14.3 ecs location
Command:
ecs location <tel-number>
no ecs location
Function:
Configure the location with ECS ELIN format on the port, the no command cancels the configured location.
Parameter:
<tel-number>: location characters with ECS ELIN format, such as emergent telephone number, it is character string
with the length between 10 and 25.
Default:
No location with ECS ELIN format is configured.
Command Mode:
Port mode
Usage Guide:
Length range of the location character string between 10 and 25 with ECS ELIN format.
Example:
Configure the location of ECS ELIN format on port 19.
Switch(Config-If-Ethernet1/19)# ecs location 880-445-3381
14.4 lldp med fast count
Command:
lldp med fast count <value>
no lldp med fast count
Function:
When the fast LLDP-MED startup mechanism is enabled, it needs to fast send LLDP packets with LLDP-MED TLV,
this command sets the value of sending the packets fast, the no command restores the default value.