PLANET WGSW-52040 - Manual (Page 745)

51-285
Configure the port as dhcpv6 trust port, it does not establish dynamic DHCPv6 binding again and allows all DHCPv6
protocol packets to pass; no command deletes the port trust function.
Parameter:
None.
Command Mode:
Port Mode.
Default:
Disable.
Usage Guide:
Set the port as dhcpv6 trust attribute, enable uplink port of the switch with SAVI function for connecting dhcpv6
server or dhcpv6 relay generally.
Example:
Set ethernet1/1 to be DHCP trust port.
Switch(config)#interface ethernet1/1
Switch(config-if-ethernet1/1)#ipv6 dhcp snooping trust
51.1.4 ipv6 nd snooping trust
Command:
ipv6 nd snooping trust
no ipv6 nd snooping trust
Function:
Configure the port as slaac trust and RA trust port, this port will not establish dynamic slaac binding any more and
forwards RA packets. The no command deletes the port trust function.
Parameter:
None.
Command Mode:
Port Mode.
Default: