PLANET WGSW-52040 - Manual (Page 447)

28-58
Default Settings:
No more than 2 Ping request messages will be sent by default.
Command Mode:
Global Configuration Mode.
Examples:
Set the max number of Ping request (Echo Request) message to be sent in Ping-detection of conflict on DHCP
server as 3.
Switch(config)#ip dhcp ping packets 3
Related Command: ip dhcp conflict ping-detection enable, ip dhcp ping timeout
28.1.20 ip dhcp ping timeout
Command:
ip dhcp ping timeout <timeout-value>
no ip dhcp ping timeout
Function:
Set the timeout period (in ms) of waiting for a reply message (Echo Request) after each Ping request message (Echo
Request) in Ping-detection of conflict on DHCP server, whose default value is 500ms. The no operation of this
command will restore the default value.
Parameters:
<timeout-value> is the timeout period of waiting for a reply message after each Ping request message in
Ping-detection of conflict.
Default Settings:
The timeout period is 500ms by default.
Command Mode:
Global Configuration Mode.
Examples:
Set the timeout period (in ms) of waiting for each reply message (Echo Request) in Ping-detection of conflict on
DHCP server as 600ms.