PLANET WGSW-52040 - Manual (Page 121)

2-120
Change the name of file “nos.img” in the current working directory to “nos-6.1.11.0.img”.
Switch# rename nos5.img nos-6.1.11.0.img
Rename flash:/nos5.img to flash:/nos-6.1.11.0.img ok！
2.9 rmdir
Command:
rmdir <directory>
Function:
Delete a sub-directory in the designated directory on a certain device .
Parameters:
<directory> is the sub-directory name, a sequence of consecutive characters whose length ranges from 1 to 80.
Command Mode:
Admin Mode.
Default Settings:
None.
Usage Guide:
The directory to be deleted should exist and be empty, that is, all files in the directory should be deleted before
deleting it, or an error prompt will be displayed.